Electrochemical Monitoring of Methotrexate Anticancer Drug in Human Blood Serum by Using in situ Solvothermal Synthesized Fe3O4/ITO Electrode

Here, we reported on a one‐step fabrication of magnetite Fe₃O₄ nanoparticles/indium tin oxide (ITO) electrode based on the direct growing of Fe₃O₄ nanoparticles on the ITO surface by using a solvothermal process. The modified electrode was used as electrochemical methotrexate (MTX) biosensor with high sensitivity based on cyclic voltammetry and square wave voltammetry techniques. The results demonstrated a linear relationship between the MTX concentration and its oxidation current peak over a wide range from 10^?5 to 10^?14 mole/L with a limit of detection of 0.4×10^?15 M based on the square wave voltammetry (SWV) technique. In addition, Fe₃O₄/ITO electrode showed a good capability for measuring very low concentrations of MTX drug dissolved in human serum solution. Also, Fe₃O₄/ITO electrode was used for detecting MTX in blood serum samples collected from patients after their treatment with MTX. The prepared electrode showed the higher sensitivity that higher than the Viva‐E instrument, which opens the door for developing a cheap, simple and higher sensitive MTX sensor.     

Periodic,breather and rogue wave solutions for a generalized (3+1)-dimensional variable-coefficient B-type Kadomtsev–Petviashvili equation in fluid dynamics

Under investigation in this paper is a generalized (3+1)-dimensional variable-coefficient B-type Kadomtsev–Petviashvili equation, which describes the propagation of nonlinear waves in fluid dynamics. Periodic wave solutions are constructed by virtue of the Hirota–Riemann method. Based on the extended homoclinic test approach, breather and rogue wave solutions are obtained. Moreover, through the symbolic computation, the relationship between the one-periodic wave solutions and one-soliton solutions has been analytically discussed, and it is shown that the one-periodic wave solutions approach the one-soliton solutions when the amplitude $\eta \to 0$.     

A novel nano‐size lanthanum metal–organic framework based on 5‐amino‐isophthalic acid and phenylenediamine: Photoluminescence study and sensing applications

In this paper, a novel lanthanum metal–organic framework La‐MOF was prepared via hydrothermal and reflux methods. The La‐MOF was achieved through the reaction of a 5‐amino‐isophthalic acid with 1, 2‐phenylenediamine and lanthanum chloride. The prepared La‐MOF structure was confirmed by XRD, mass spectrometry, IR, UV–Vis and elemental analysis, whereas the size, and morphology was examined by FE‐SEM/EDX and HR‐TEM. The results indicated that the La‐MOF prepared via both methods have the same structure and composition. Meanwhile, the MOF yield, reaction time, morphology, physiochemical and sensing properties were highly depended on the used preparation method. The photoluminescence (PL) study was carried out for the La‐MOF, and the results showed that La‐MOF exhibits strong emission at 558 nm after excitation at 369 nm. Moreover, the PL data indicating that the La‐MOF has highly selective sensing properties for iron (III) competing with different metal ions. The Stern‐Völmer graph shows a linear calibration curve which achieved over a concentration range 1.0–500 μM of Fe³⁺ with a correlation coefficient, detection, and quantitation limits 0.998, 1.35 μM and 4.08 μM, respectively. According to the remarkable quenching of the PL intensity of La‐MOF using various concentrations of Fe³⁺, it was successfully used as a sensor for Fe³⁺detecting in different water resources (pure and waste) samples. The quenching mechanism was studied and it has a dynamic type and due to efficient energy transfer between the La‐MOF and Fe³⁺.     

Fluorene‐based Lanthanide Coordination Polymer: Structure,Luminescence and Sensing of Picric Acid

Luminescent coordination polymers can be potential chemosensors and extensive efforts are being devoted to improve their selectivity and sensitivity. In this work, we report a new kind of fluorene‐based Tb‐CP, Tb₄L₆·7DMF·5H₂O ( Tb ₄ L ₆ , H₂L = 4,4′‐(9,9‐dimethyl‐9H‐fluorene‐2,7‐diyl)dibenzoic acid), showing 2D network and strong blue emission. Meanwhile, Tb ₄ L ₆ exhibits excellent selectivity and sensitivity for picric acid (PA). The quenching constant (K_sv) of Tb ₄ L ₆ is equal to 4.5 × 10⁴ L/mol during the concentration range of 0–30 μmol/L, which approaches the best reported CPs‐based on PA sensor up to now. Moreover, we went into depth on the possible mechanisms of luminescence quenching.     

Two novel d10 transition metal complexes based on 1H‐benzimidazole‐5,6‐dicarboxylic acid: Synthesis,structure and multifunctional luminescence detection

Two new coordination complexes based on benzimidazole dicarboxylic acid, Zn(Hbidc)?H₂O ( 1 ) and Cd(Hbidc)(H₂O) ( 2 ), have been synthesized under hydrothermal conditions. The complexes were characterized using elemental analysis, infrared and UV–visible spectroscopies, powder X‐ray diffraction, thermogravimetry and single‐crystal X‐ray diffraction. Structural analyses showed that the crystal structures of 1 and 2 are different, due to the various modes of linking of the benzimidazole dicarboxylic acid. Complex 1 has a two‐dimensional network structure and 2 has a three‐dimensional network structure. In addition, we studied the performance of the fluorescence response of two complexes. Results showed that the complexes can be used as chemical sensors for multifunctional testing, such as for UO₂²⁺, xanthine and Fe³⁺ ions. Even if the concentration is very low, they could also be detected, showing that coordination complexes 1 and 2 have very high fluorescence sensitivity. The detection limit for UO₂²⁺ is 5.42 nM ( 1 ) and 0.02 nM ( 2 ), that for xanthine is 1.37 nM ( 1 ) and 0.28 nM ( 2 ), and that for Fe³⁺ ions is 0.76 nM ( 1 ) and 0.62 nM ( 2 ).     

Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

Ultrasonic assisted functionalization of MWCNT and synergistic electrocatalytic effect of nano-hydroxyapatite incorporated MWCNT-chitosan scaffolds for sensing of nitrofurantoin

In the present work, we report the fabrication of stable composite of chitosan hydrogels (CHI) on multiwalled carbon nanotubes (MWCNT) using a simple ultrasonic-assisted method. Also, rod-like hydroxyapatite nanoparticles (HA NPs) were synthesised using a hydrothermal route and were incorporated into the highly conductive MWCNT-CHI scaffolds using an ultrasonication method. The functionalization of MWCNT and preparation of HA NPs on MWCNT-CHI nanocomposite were done using the sonication over the frequency of 37 kHz with the ultrasonic power capable of 150 W (Elmasonic Easy 60H bath sonicator). The resulting hybrid HA NPs/MWCNT-CHI nanocomposites have an excellent surface area and high surface to volume ratio, which leads to the sensitive detection of nitrofurantoin than pristine MWCNT and HA NPs. The complete elemental and morphological analyses of the HA NPs/MWCNT-CHI nanocomposites were characterised by XRD, FTIR, RAMAN, FESEM, TEM, EDX, and elemental mapping techniques. Electrochemical analysis of the HA NPs/MWCNT-CHI nanocomposites was carried out by cyclic voltammetry, electrochemical impedance spectroscopy and amperometry methods. The modified glassy carbon electrode (GCE) of HA NPs/MWCNT-CHI nanocomposites exhibit the nitrofurantoin detection activity at the linear range of 0.005–982.1 µM with the detection limit of 1.3 nM. The synergistic electrocatalytic activity of HA NPs/MWCNT-CHI nanocomposites modified GCE is correlated to the sensitivity of 0.16 µAµM⁻¹ cm⁻² with excellent precision and accuracy towards the sensing of nitrofurantoin.     

Reduced magnetic disorder at low temperature in Ca3Co2O6 via zinc substitution

ABSTRACT

The compound Ca₃Co₂O₆ undergoes a transition into a spin-density wave (SDW) state near 24?K. Below ～10?K, this unstable SDW state coexists with a nearly- degenerate commensurate antiferromagnetic state as well as short-range magnetic order. Clear signatures of this strong magnetic disorder have been observed in the response of entropy to changing magnetic field and temperature. We performed a calorimetry study of Ca₃Co₂O₆ and Ca₃Co_1.9Zn_0.1O₆ in order to compare their entropic responses at low temperature. Our results for Ca₃Co₂O₆ reveal that ΔS(T, H)?≡?S(T, H)?S(T, H?=?0) increases as either temperature or magnetic field increase. In contrast, ΔS data for Ca₃Co_1.9Zn_0.1O₆ were relatively unresponsive to changes in temperature or field, suggesting that Zn substitution may reduce the low-temperature magnetic disorder observed in Ca₃Co₂O₆. These results are discussed within the context of two cases (Ca₃Co₂O₆ under applied pressure and Ca_2.75R_0.25Co₂O₆ (R?=?Dy, Lu)) in which a single magnetic ground state is stabilised.     

Boussinesq方程行波解的存在性

利用平面动力系统方法的分支理论，研究了Boussinesq方程，通过对Boussinesq方程进行行波变换，得到了相应行波系统的首次积分和平衡点，给出了不同参数条件下的相图，证实了Boussinesq方程存在孤立波解和周期波解。